MODIFIED THINSET:
(Custom Porcelain Tile Fortified Thin-Set Mortar)
Product Description
Designed to provide superior bonding of porcelain tile to concrete
surfaces, backerboards and self-leveling underlayment. Polymer-
modified Porcelain Tile Fortified Thin-Set Mortar also excels for large
modular tiles and radiant heating system installations. Use it for
interior or exterior floors, walls or countertops.
Suitable Tile Types
cement body tile
Impervious porcelain and glass tile
Brick and stone veneer
Cement-based precast terrazzo
Natural stone tile
Suitable Substrates
Concrete, mortar beds, masonry, Portland cement plaster
WonderBoard®, cement backerboards
Liquid applied waterproofing membranes such as RedGard® and
Custom® 9240
Crack prevention sheet membranes such as Crack Buster® Pro
Exterior Grade Plywood (interior residential and light commercial dry
areas)
Gypsum wallboard (interior dry areas)
Existing ceramic tile (scarified)
Fully-bonded sheet vinyl flooring (scarified)
Plastic laminates (scarified)
Cutback adhesive
UN-MODIFIED THINSET
(Customblend Standard Thinset Mortar)
Product Description
Offers economy with good bond strength for most tile projects and is
recommended for floor installations. Good for setting Saltillo and other
similar clay pavers. Offers good working time to apply and adjust tiles.
Mix with Thin-Set Admix Concentrate or Thin-Set Mortar Admix for
best results when setting dense tile or setting over Exterior Grade
Plywood (EGP), existing flooring and for exterior applications. Meets
ANSI A118.1 without additives. Meets ANSI A118.4 and A118.11 when
mixed with Thin-Set Admix Concentrate or Thin-Set Mortar Admix.
Suitable Tile Types
Vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry,
cement body tile
Impervious porcelain and glass tile
Brick and stone veneer
Cement-based precast terrazzo
Natural stone tile
Suitable Substrates
When Mixed with Water ANSI A118.1 Specifications:
Interior floors, walls, countertops
Concrete, mortar beds, masonry, Portland cement plaster
Gypsum wallboard (dry areas)
Water-resistant wallboard
WonderBoard®, cement backerboards
Uncoupling systems requiring a non-modified thin-set mortar
Mix with Thin-Set Mortar Admix ANSI A118.4 and
A118.11 Specifications:
Interior and exterior floors, walls, countertops
Areas subject to freeze-thaw cycles
Exterior Grade Plywood (interior residential and light commercial dry
areas)
Existing ceramic tile
Sheet vinyl flooring, VCT
Plastic laminates
Cutback adhesive
(Customblend OmniGrip Maximum Strength adhesive)
Product Description
A flexible, high-polymer adhesive for thin-set tile and stone
applications. Designed to resist prolonged water exposure, OmniGrip®
has 33% less shrinkage than traditional adhesives and can be used for
ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged
stone tile installations.
Suitable Tile Types
Vitreous, semi-vitreous or non-vitreous tile: ceramic
Impervious porcelain
Suitable Substrates
Concrete, mortar beds, masonry, Portland cement plaster
WonderBoard®, cement backerboards
Liquid applied waterproofing membranes such as RedGard® and
Custom® 9240
Crack prevention sheet membranes such as Crack Buster® Pro
Exterior Grade Plywood (EGP) - interior residential and light
commercial dry areas
Gypsum wallboard (interior dry areas)
Existing ceramic tile
Fully-bonded sheet vinyl flooring
Plastic laminates
Cutback adhesive
Contrary to what some people may say, we DO NOT use adhesive for any floor installations. We find that there is a long dry time and do not find it suitable.
You can find a link to all the Custom products here, this is a great site to get info on any and all products that they carry!
No comments:
Post a Comment